SD6N Bulldozer & Solid Waste Bulldozer

Quick Description

SD6N bulldozer is 182 horsepower track-type dozer with hydraulic direct drive, semi-rigid suspended and pilot hydraulic control. This bulldozer is one of the best in the category of small dozers weighing approximately 17tons and is equipped with Cummins QSL9.3 China stage III,this engine has the charateristics of big torque reserve coefficient and capacity against over-load. The torque converter is a hydro-mechanical converter whose power is divided outside,which has the characteristics of wide high efficiency range. This small dozer for sale is equivalent to Caterpillar Bulldozer D6G,D5, Komatsu D65, BEML bulldozer BD80, BD65.

  • Engine - Guangxi Cummins (Electronic Injectors)
  • Engine Rated Power(136 KW/182 HP)
  • Operating weight 16,800 Kg (without ripper)
  • Pilot joy stick hydraulic control
  • LED Lights

Sd6n Solid Waste Dozer Sd6n Solid Waste Dozer

Special Machine for Solid Waste & Swamp Lands

Sd7n Solid Waste Dozer

Sd7n Solid Waste Dozer

Solid Waste Bulldozer

This bulldozer is equipped with special low ground pressure (LGP) track plates and solid waste blade that is far more effective than other blades used in bulldozers for landfills, this is an ideal machine to be used in Solid Waste landfills which results in much higher efficiency than ordinary dozers.

  • Traingular Swamp Track Plates

    Triangular swamp track plates (910 mm) with additional protection for wetlands, sludge and solid waste result in a much higher efficiency than the standard machine.

  • Solid Waste Blade

    Special solid waste blade not only enables the machine to carry more waste, but also protects the front radiator.

Solid Waste Blade

To buy sd6n bulldozer or solid waste dozer, place your order here. Shipping charges will be extra as applicable.

Make Guangxi Cummins
Model Guangxi Cummins QSL9.3
Type Electric control injector, charge air cooled
Cooling System Type Water cooled
Turbo charged Yes
Rated Power (KW/HP) 136/182
Rated Revolution (rpm) 1850
Maximum Torque (N.m/rpm) 880/1100
No. of cylinders 6
Bore x Stroke ( mm) 116 x 145
Displacement 9.3 L
Fan Drive type Mechanical
Min ground clearance(mm) 445
Compression rate 16.8 : 1
Fuel filter 3
Fuel System Type Guangxi Cummins type, electronic control fuel injection
Alternator 24V / 50A
Starting motor 7 KW
Battery Rating 2 x 12V, 100 Ah
LED Lights Yes
Power Train
Torque convertor / Clutch Torque Convertor
Type Power separating hydraulic mechanical type
Transmission/Gear Box Transmission Type
Type / Model Power shift planetary transmission with 3 speeds forward and 3 speed reverse, speed and direction can be quickly shifted
No. of gear forward 3
No. of gear backward 3
Max forward speed 10.8
Max reverse speed 12.9
Maximum drawbar pull 1st gear - 131.68 KN 2nd gear - 124.95 KN
Hydraulic System
Operation type Pilot hydraulic control
Hydraulic pump
Type Gears oil pump
Capacity / Discharge 170 (L/min)
Relief pressure / Max pressure 15.5 Mpa
Hydraulic cylinders
Type Double acting piston type
Blade jack lift (No. of cylinders/bore x stroke) 2 / 100 x 1000
Blade tilt (No. of cylinders/bore x stroke) 1 / 160 x 140
Ripper : (No. of cylinders /Bore x Stroke (mm)) Ripper : 1 / (184.25 x 304.8)
Control Valves Type Pilot operated with joystick control
Type Multiple disc oil, power metallurgy, disc compressed by spring
Steering Control Hydraulically operated
Under Carriage
Track gauge (mm) / Track pitch 1880
Track rollers (each side) 7
Carrier rollers (each side) 2
Track shoes (each side) 39
Shoe width (mm) 560 / 610 (Optional)
Ground pressure 56.2 Kpa including ripper and blade
No. of idler (each side) 1
Engine Replaceable cartridge filter
Transmission One magnetic oil strainer and replaceable element by-pass filter
Steering & Braking One magnetic oil strainer and replaceable element by-pass filter
Hydraulic System Return filter
Operating Mass
Operating mass (kg) (approx.) without ripper - 16800
Blade Specifications - General
BLADE ATTACHMENT 1 - Standard Machine Tilt Semi U blade
Overall length with dozer 5167 With ripper - 6145
Max. lift above ground / height (mm) 998
Max. drop below ground/ Max digging depth 592
Blade / Dozing Capacity(Cum) 4.6
Mass in (kg) Dozer Blade attachment / Dozing weight 2100 kg
Blade width (mm) 3324
Blade height (mm) 1170
BLADE ATTACHMENT (Optional blade) Coal blade - U type
Overall length with dozer 5167.0
Max. lift above ground / Max lifting height (mm) 998.0
Max. drop below ground / Maximum digging depth 592.0
Blade / Dozing Capacity(Cum) 6.7
Mass in (kg) Dozer Blade attachment / Dozing weight 2310.0
Blade width (mm) 3676.0
Blade height (mm) 1350.0
Type Brake is oil two direction floating band break
Control / Actuation type Operated by mechanical foot pedal
CABIN Sealed cabin with air conditioner (optional)
INSTRUMENTATION Hour meter, fuel gauge, temperature gauge, battery charge indicator, horn, oil pressure gauge, front light, rear lights, plough lights, indicator lights
ADDITIONAL ATTACHMENTS 1). Air conditioner 2). U blade (Coal blade) 3). 3 shank ripper 4). Solid waste blade 5). Special machine for solid waste with broad 910mm triangular track plates and solid waste blade with additional protection.
Sd6n Bulldozer 182 HP
Sd6n Bulldozer Small Dozer
Sd6n Cummins Engine
sd6n Guangxi Cummins QSL9.3
  • Air Conditioner
  • U-blade (Coal Blade)
  • 3 Shank Ripper
  • Solid Waste Blade
  • Special machine for solid waste with broad 930mm triangular track plates and solid waste blade with additional protection

Verify Your Email to download catalogue